manualshive.com logo in svg

VEDUM Air vents, Инструкция по эксплуатации, Страница: 48 / 66

Поделиться
Скачать
VEDUM Air vents Скачать руководство пользователя страница 48

49

All dimensions in millimetres. Subject to changes

THE CATALOGUE

 GRASS

  733

05-2011

1

2

3

4

5

6

7

8

ROLLER SYSTEMS

INTEGRA TOP 

TECHNICAL INFORMATION

MOUNTING/DISMOUNTING

Fitting the front with Integra Click-on

• 

Insert front

• 

Front will automatically engage

Click

Removing the front with Integra Click-on

• 

 Release the front by turning in the  
direction of the arrow

• 

Remove front

Fitting the front with Integra Slide-on

• 

Insert front

• 

Fix front with fixing screw

Removing the front with Integra Slide-on

• 

Release fixing screw

• 

Remove front

ADJUSTMENTS

Eccentric height adjustment

Integra Click-on

Integra Slide-on

Integra Click-on and Slide-on are supplied with 
factory setting at zero height position. This means 
that the drawer can be adjusted upwards and 
downwards.

Should adjustment be necessary after assembly:
 

• 

Release fixing screw

• 

Operate the adjustment cam

• 

Re-tighten fixing screw

1  

 Fixing screw

2  

Eccentric height adjuster (cam)

3   

Removing the front

2

1

3

1

2

Roller systems.Integra Top.Technical information.

6. Installation of details

INSTALLING THE DOOR.

 

Connect the fitted hinge parts so that the 

door fits into place. Loosen the screws and adjust vertically so that 
the doors line up with each other. To disassemble the door, use the 
clips at the back.

ADJUSTING DOORS. 

Loosen the front screw and adjust  

sideways. Loosen the back screw and adjust depthwise.

INSTALLING FRONTS ON INTEGRA 
STANDARD DRAWERS. 

On drawers with railings, adjust the gradient of the drawer front by screwing in the railing. 

ADJUSTING FRONTS ON INTEGRA STANDARD DRAWERS.

All dimensions in millimetres. Subject to changes

THE CATALOGUE

 GRASS

  733

05-2011

1

2

3

4

5

6

7

8

ROLLER SYSTEMS

INTEGRA TOP 

TECHNICAL INFORMATION

MOUNTING/DISMOUNTING

Fitting the front with Integra Click-on

• 

Insert front

• 

Front will automatically engage

Click

Removing the front with Integra Click-on

• 

 Release the front by turning in the  
direction of the arrow

• 

Remove front

Fitting the front with Integra Slide-on

• 

Insert front

• 

Fix front with fixing screw

Removing the front with Integra Slide-on

• 

Release fixing screw

• 

Remove front

ADJUSTMENTS

Eccentric height adjustment

Integra Click-on

Integra Slide-on

Integra Click-on and Slide-on are supplied with 
factory setting at zero height position. This means 
that the drawer can be adjusted upwards and 
downwards.

Should adjustment be necessary after assembly:
 

• 

Release fixing screw

• 

Operate the adjustment cam

• 

Re-tighten fixing screw

1  

 Fixing screw

2  

Eccentric height adjuster (cam)

3   

Removing the front

2

1

3

1

2

Roller systems.Integra Top.Technical information.

All dimensions in millimetres. Subject to changes

THE CATALOGUE

 GRASS

  733

05-2011

1

2

3

4

5

6

7

8

ROLLER SYSTEMS

INTEGRA TOP 

TECHNICAL INFORMATION

MOUNTING/DISMOUNTING

Fitting the front with Integra Click-on

• 

Insert front

• 

Front will automatically engage

Click

Removing the front with Integra Click-on

• 

 Release the front by turning in the  
direction of the arrow

• 

Remove front

Fitting the front with Integra Slide-on

• 

Insert front

• 

Fix front with fixing screw

Removing the front with Integra Slide-on

• 

Release fixing screw

• 

Remove front

ADJUSTMENTS

Eccentric height adjustment

Integra Click-on

Integra Slide-on

Integra Click-on and Slide-on are supplied with 
factory setting at zero height position. This means 
that the drawer can be adjusted upwards and 
downwards.

Should adjustment be necessary after assembly:
 

• 

Release fixing screw

• 

Operate the adjustment cam

• 

Re-tighten fixing screw

1  

 Fixing screw

2  

Eccentric height adjuster (cam)

3   

Removing the front

2

1

3

1

2

Roller systems.Integra Top.Technical information.

DISASSEMBLING FRONTS ON 
INTEGRA STANDARD DRAWERS.

VERTICAL ADJUSTMENT

 of the drawer 

front. Loosen locking screw 1. Adjust with 
adjusting screw 2. Fasten the door again 
with locking screw 1.

SIDEWAYS ADJUSTMENT

 – loosen the 

screws fastening the front fittings into the 
drawer front a little. Adjust the front and 
tighten the screws. 

All dimensions in millimetres. Subject to changes

THE CATALOGUE

 GRASS

  733

05-2011

1

2

3

4

5

6

7

8

ROLLER SYSTEMS

INTEGRA TOP 

TECHNICAL INFORMATION

MOUNTING/DISMOUNTING

Fitting the front with Integra Click-on

• 

Insert front

• 

Front will automatically engage

Click

Removing the front with Integra Click-on

• 

 Release the front by turning in the  
direction of the arrow

• 

Remove front

Fitting the front with Integra Slide-on

• 

Insert front

• 

Fix front with fixing screw

Removing the front with Integra Slide-on

• 

Release fixing screw

• 

Remove front

ADJUSTMENTS

Eccentric height adjustment

Integra Click-on

Integra Slide-on

Integra Click-on and Slide-on are supplied with 
factory setting at zero height position. This means 
that the drawer can be adjusted upwards and 
downwards.

Should adjustment be necessary after assembly:
 

• 

Release fixing screw

• 

Operate the adjustment cam

• 

Re-tighten fixing screw

1  

 Fixing screw

2  

Eccentric height adjuster (cam)

3   

Removing the front

2

1

3

1

2

Roller systems.Integra Top.Technical information.

All dimensions in millimetres. Subject to changes

THE CATALOGUE

 GRASS

  733

05-2011

1

2

3

4

5

6

7

8

ROLLER SYSTEMS

INTEGRA TOP 

TECHNICAL INFORMATION

MOUNTING/DISMOUNTING

Fitting the front with Integra Click-on

• 

Insert front

• 

Front will automatically engage

Click

Removing the front with Integra Click-on

• 

 Release the front by turning in the  
direction of the arrow

• 

Remove front

Fitting the front with Integra Slide-on

• 

Insert front

• 

Fix front with fixing screw

Removing the front with Integra Slide-on

• 

Release fixing screw

• 

Remove front

ADJUSTMENTS

Eccentric height adjustment

Integra Click-on

Integra Slide-on

Integra Click-on and Slide-on are supplied with 
factory setting at zero height position. This means 
that the drawer can be adjusted upwards and 
downwards.

Should adjustment be necessary after assembly:
 

• 

Release fixing screw

• 

Operate the adjustment cam

• 

Re-tighten fixing screw

1  

 Fixing screw

2  

Eccentric height adjuster (cam)

3   

Removing the front

2

1

3

1

2

Roller systems.Integra Top.Technical information.

All dimensions in millimetres. Subject to changes

THE CATALOGUE

 GRASS

  733

05-2011

1

2

3

4

5

6

7

8

ROLLER SYSTEMS

INTEGRA TOP 

TECHNICAL INFORMATION

MOUNTING/DISMOUNTING

Fitting the front with Integra Click-on

• 

Insert front

• 

Front will automatically engage

Click

Removing the front with Integra Click-on

• 

 Release the front by turning in the  
direction of the arrow

• 

Remove front

Fitting the front with Integra Slide-on

• 

Insert front

• 

Fix front with fixing screw

Removing the front with Integra Slide-on

• 

Release fixing screw

• 

Remove front

ADJUSTMENTS

Eccentric height adjustment

Integra Click-on

Integra Slide-on

Integra Click-on and Slide-on are supplied with 
factory setting at zero height position. This means 
that the drawer can be adjusted upwards and 
downwards.

Should adjustment be necessary after assembly:
 

• 

Release fixing screw

• 

Operate the adjustment cam

• 

Re-tighten fixing screw

1  

 Fixing screw

2  

Eccentric height adjuster (cam)

3   

Removing the front

2

1

3

1

2

Roller systems.Integra Top.Technical information.

CLICK!

6.11 DOORS AND INTEGRA STANDARD DRAWER

Содержание Air vents



































































Отзывы:

Нет отзывов