19
1. The protective plate is supplied in one of the drawers during transport.
The protective plate is included as standard in base cabinets for hobs
and is installed on site; the plate protects the underside of the hob from
mechanical damage.
2.
Classic and Scala drawer systems:
when the cabinet is installed, the
protective plate must be placed on the shelf pins located C-C 43.5 mm
from the top edge of the frame. Four pins in cabinet depth 580 mm and
six pins in cabinet depth 730 mm. It is 39 mm from the top edge of the
cabinet to the top edge of the protective plate.
Integra drawer system:
when the cabinet is installed, the protective
plate must be placed on the drawer runners. It is 47 mm from the top
edge of the cabinet to the top edge of the protective plate.
3. NB: The protective plate must be installed with the front edge folded
up behind the partition strip at the front edge of the cabinet and folded
down at the back.
Check with the white goods supplier whether a protective plate is
required under the hob in question, and check that our solution for the
ventilation in the cabinet frame is sufficient according to the installation
drawing. If there is anything that needs to be rectified, this should be
resolved on site.
1
2
3
1.13 INSTALLING PROTECTIVE PLATE IN HOB CABINET
1. Installing base and tall cabinets
1.14 INSTALLING SUPPORT BRACKETS IN HOB CABINETS
Counter tops need to be supported when joining a hob to the partition strip
on a hob cabinet. Support bracket art. no. 39036-39038 is used for counter
tops that are thinner than 30 mm and for wide (800-1000 mm) hob cabinets
with particularly heavy hobs. The support bracket is available as an accessory
for base cabinets for hobs, and is installed on site by the customer. Screw
not included.