11
2.4 MOUNTING
WARNING:
Risk of explosion! Never install the controller in a
sealed enclose with flooded batteries! Do not install in a
confined area where battery gas can accumulate.
WARNING:
Risk of electric shock! When wiring the
solarmodules,the PV array can produce a high opencircuit
voltage, so turn off the breaker before wiring and be careful when
wiring.
CAUTION
:
The controller requires at least 150mm of
clearance above and below for proper air flow. Ventilation is
highly recommended if mounted in an enclosure.
Installation procedure
:
Step 1:
Determination of installation location and heat-
dissipation space
Determination of installation location: The controller shall
be installed in a place with sufficient air flow through the
radiators of the controller and a minimum clearance of
150 mm from the upper and lower edges of the controller
Figure2-1
Содержание 1206 Series
