lution. Then screw down the adjusting screw until the stop can just be felt and then slacken it back through 3/4 of a revolution. Then fix this setting
by means of the lock nut.
Fig. 17. Rough adjustment of clutch
(1) Adjusting screw and lock nut
(2) Covering cap
Mechanical brakes
Adjust the front mechanical brake at the hand lever to the dimension S = 3 to 5 mm (Fig.
16
). When not actuated, the brake shoes must not slide.
Adjust the pedal brake in such a way that, in a convenient sitting position, full braking effect is achieved with a short travel of actuation of the pedal.
Then adjust the stop light switch:
Bedienungsanleitung für MZ-Motorrad ETZ 125 und ETZ 150 (englisch)
http://www.mz-b.de/miraculis/aw/mz/text/etz15be/etz15be.html
31 von 63
03.11.2008 01:31