means of the thief-proofing device according to Fig.
8
.
3.3. Information for Running-in
nächster Punkt
;
Index
A distance of 1,500 to 2,000 km is considered as running-in period for the engine. During this time, observe the following information.
Allow the engine with the vehicle in a stationary Position to run for as short a period as possible but move off and then the engine will soon reach
operating temperature; in the case of a prolonged stop, shut off the engine.
1.
Observe the ranges specified for the various gears in Figs.
10
and
11
during running-in, and change gears in time.
2.
Systematically increase the travelling speeds and engine speeds until the end of the running-in period.
3.
Frequently change engine speeds and travelling speeds. - Normal highways are suited better for running-in than superhigways (Autobahn)!
4.
Strictly adhere to the specified inspections in an MZ-Service Workshop.
5.
4. Maintenance
4.1. General Instructions
nächster Punkt
;
Index
The tool kit accomodated under the right-hand side panel enables you to perform almost all maintenance operations according to the Maintenance
Chart. Take the Guarantee Regulations into consideration.
Have the faults removed that you found during the maintenance.
Bedienungsanleitung für MZ-Motorrad ETZ 125 und ETZ 150 (englisch)
http://www.mz-b.de/miraculis/aw/mz/text/etz15be/etz15be.html
21 von 63
03.11.2008 01:31
