(4) Adjusting screw for throttle - cable control
(5) Locking nut
(6) Clamping screw
(7) Stop screw for throttle valve
(8) Idling air adjusting screw
(7). For cleaning the carburetter, dismantle it in the order 1 to 6 (Fig.
21
).
Notice!
Do not distort the float. Do not push wire through the jets - blow air through them.
Adjust the friction brake (B in Fig.
5
) at the throttle-twist grip in such a way that the twist grip does not return automatically into the initial position
and that it can still be turned conveniently.
The paper air filter is accessible after the removal of the battery (Fig.
22
). Carefully tap the filter - do not wash it. Moist air filters must be dried or
replaced by new ones. The induction system must be tight, that is to say, it must be assembled with every care.
Bedienungsanleitung für MZ-Motorrad ETZ 125 und ETZ 150 (englisch)
http://www.mz-b.de/miraculis/aw/mz/text/etz15be/etz15be.html
36 von 63
03.11.2008 01:31
