switch on the ignition system
loosen the check nut
actuate the brake lever - brake shoes are just applied enough to start sliding
turn the contact screw until the stop light flashes up
tighten the check nut
Fig. 18. Adjusting the rear wheel brake and stop-light switch
(1) Adjusting nut of rear wheel brake
(2) Connection cable
(3) Setting screw
Disk brake
The brake lever is not adjustable. Screw the stop light switch (1) into the jointed piece (9) only to such an extend that the stop light flashes up
immediately at the beginning of actuating the brake lever while the brake lever in its rest position still contacts the jointed piece. The brake fluid level
must be between the marks 'max.' and 'min.' on the reservoir. When closing the cover of the reservoir, put the hermetic bellows and the vent ring in
Bedienungsanleitung für MZ-Motorrad ETZ 125 und ETZ 150 (englisch)
http://www.mz-b.de/miraculis/aw/mz/text/etz15be/etz15be.html
32 von 63
03.11.2008 01:31