VEAB AW 13a-63s, Руководство пользователя

Страница: 18 / 48

AW 13s-63s, 13a-63a
18
3. Speed selector AWC 13-63 with three speeds (figure 22) that are selected manually.
1 = low speed, 2 = medium speed and 3 = high speed. Protected to IP65.
Can control up to two AW-s heaters. For wiring diagram, see appendix E.
NOTE! If an R31 or SR121/1 thermostat is used, a maximum of one, respectively two, AW-s heaters
can be connected.
4. Speed selector for EC motors SMT-D-4P-EM with three speeds (figure 23) that are selected manually.
0 = stop, 1 = low speed, 2 = medium speed, and 3 = high speed. Degree of protection IP44/54.
Can control up to five AW-s EC heaters. For wiring diagram, see appendix K.
NOTE If an R31 or SR121/1 thermostat is used, a maximum of
one, respectively two, AW-s EC heaters can be connected.
5. Valve with IP44 rating (figure 24), maximum water temperature 90 °C, and pressure class PN25 (25 bar).
To be used together with the thermostats R31 and SR121/1.
More information can be found in the section entitled “Water connection for the AW-s and the AW-a”, item 9.
Electrical connections for AW-a models
1. Installation must be carried out by a qualified electrician.
2. The fan heater is designed for 230 VAC.
3. Electrical connection to the mains requires fixed wiring. A multi-pole breaker with a minimum of 3 mm
between the poles must be used for the permanent connection.
4. Remove the cover of the terminal box.
5. Connections for the fan heater is to be made in accordance with the supplied wiring diagram inside the cover,
see figure 25 or appendix F (appendix J for EC).
Figure 22 AWC 12-62 Figure 23 SMT-D-4P-EM Figure 24 AWTV 13-63
Figure 25