VEAB AW 13a-63s, Руководство пользователя

Страница: 14 / 48

AW 13s-63s, 13a-63a
14
3. The fan heater may be mounted with the pipes facing left or right, when viewed from the front,
as shown in figures 6 and 7.
In rooms with high ceilings, the fan heater should be installed in a low position, but not so low that it
intrudes on the working space. A drilling template for the fan heater wall brackets with minimum distances
from floor, wall and ceiling can be found in appendix C.
4. The fan heaters are supplied with the air deflector fitted for mounting as shown in figure 6. If the fan heater
is mounted with the pipes facing right, the air deflector must be turned around for the air to be deflected
downward. Remove the six screws that hold the air deflector as shown in figure 8, then take off the air
deflector and turn it 180°. Then fasten it again with the screws.
5. Mount the fan heater as shown in figure 9 when mounting it on the ceiling for a vertical air stream.
The minimum distance to the wall must be 700 mm. If the fan heater is mounted on a ceiling, near
a corner, the minimum distance to one of the walls must be 700 mm and 2000 mm to the other.
Mounting the AWT ceiling brackets
1. Remove the sheet metal screws as shown in figure 10 (three screws on AW 43 and AW 63).
2. Mount the ceiling brackets as shown in figure 11.
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11