VDO DTCO 4.0, Инструкция по эксплуатации

Страница: 67 / 156

6
Registration – inserting company card Operation by the contractor
© Continental Automotive GmbH
67
 ejection not
possible xx
Fig. 45: Message – option II
The card information is being read:
2 Sped. Muster
 
Fig. 46: Reading the card information
The left side displays the number of the
card drawer into which the card is inser-
ted.
Next to it is the company designation
(read by the company card).
A status bar shows the further company
card reading process.
● Insert – if prompted – the country
symbol and the vehicle registration of
the vehicle:
è Inserting member state and vehicle
registration number [
}
67]
● If not yet carried out on this
DTCO 4.0, the company is now re-
gistered:
 company
locked-in
 already
locked-in
/
Fig. 47: Registering in the company
By registering, the company lock is now
activated until cancelled.
This ensures that company-specific and
personal data of the drivers which are
assigned to this company, are access
protected.
The standard display follows.
The DTCO 4.0 is in operating mode
Company , symbol

:
12:51  0km/h
 123456.7km 
Fig. 48: Standard display with inserted com-
pany card
Result: The DTCO 4.0 is ready.
● You can only download mass memory
data in order to archive and evaluate
these according to legal requirements.
è
Downloading data [
}
45]
● You can also access the data of an in-
serted driver card, e.g. to download it.
● Malfunctions on the DTCO 4.0 or the
system components are shown in the
display. Confirm the message with the
button .
è
Meaning of messages [
}
96]
Service Only!