VDO DTCO 4.0, Инструкция по эксплуатации

Страница: 93 / 156

7
Second menu level – menu functions Menus
© Continental Automotive GmbH
93
 driver 1
!x event
24h day
25.10.2018
 driver 1
Fig. 111: Menu sequence display for driver 1
All activities of the selected days or all
saved events or malfunctions or which
are still active can be displayed by
scrolling.
► Menu point display vehicle
You can use this menu point to display
the data from the mass memory.
IMPORTANT
Comparable to a printout, the data is
shown on the display, whereby one row
of the printout (24 characters) is shown
split in two rows.
 23.10.2018 14:
55 (UTC)
---------------
--------
Fig. 112: Example for the data display
If, during scrolling through the informa-
tion, you scroll back using buttons /
you can only call up approx. 20 previous
rows of the printout.
Use the button to leave the display.
Note:
• Calling up the functions to display the
data is identical with the ones for
printing the data. Therefore, they are
not described any further below.
• It is possible to call up every display in
local time.
printout in
UTC time yes
printout in
UTC time no
Fig. 113: No - display in local time
Select the displayed functions step by
step:
• displaying all driver activities in chro-
nological order.
• displaying all saved or still active
events and malfunctions.
• displaying the instances when the set
speed was exceeded.
• displaying data about vehicle identific-
ation, sensor identification, and calib-
ration.
Service Only!