•
Bluetooth™ in phone is Active
Î
The
Bluetooth communication mode (sometimes
referred to as connection) must be activated
(turned “On”) in your cellular phone.
15
16
•
Phone Distance
Î
The hands-free kit will
operate with the phone up to approx. 30 feet.
The quality of the audio signal will
deteriorate as the phone is moved further
away from the vehicle. The phone does not
need to be in the open (i.e. it can be in your
pocket, purse or briefcase) to operate but it
should not be blocked by metal (i.e. placed
in the trunk).
•
After the system becomes active (ignition is
turned on), you will likely see an indicator
on your phone (either a message is displayed
or an icon is activated) when the kit
connects through the Bluetooth link to your
phone – this process will take approx. 15 to
30 seconds. At this time the unit is fully
operational. Also, the green LED on the
Control Pad will either remain illuminated
or blink when it is actively paired to a
Bluetooth™ phone.
The Control Pad
The Control pad is your primary control interface
with the
VControl™
, it activates initial operation of
the system and provides access to all of the
available features.
The basic functions of the control pad are defined
below:
1.
Switch
2.
Volume Up
3.
Green LED
4.
Call Activation, Answer and Hang-up
5.
Mute
6.
Volume Down
•
Pressing the
initiates the voice
interface and accesses the majority
of the features
6
3
5
4
2
1
•
Speaking
Cancel
during any voice
interactive session with the unit will
exit the current menu and return to
the main “
Ready”
prompt
•
Always wait for the
<
Beep> before
speaking command/digits to the
system
•
If you are unsure how to respond to a
particular voice prompt, do not say
anything and a list of commands will
be provided.
•
If the voice recognition is having
trouble recognizing your speech, try
the following:
i.
Speak slower
•
Pressing
during an active
session jumps immediately to the
end of the prompt
ii.
Do not speak overly loudly
iii.
Emphasize/annunciate the
words or digits clearly
