background image

Chapter 2: Main Menu 

 

Once your phone has been activated/paired, the 

VControl

 will automatically connect to your phone 

each time you enter the vehicle and start the ignition 
– this “pairing” on Bluetooth

 connections will take 

1-2 minutes and is active (ready) when the green 
LED light is illuminated (constant) on the Control 
Pad. 

 

A single <Beep> will be heard after most 
prompts coming from the unit.  This signifies 
that the system is now ready to accept input 
from the operator 

 

You must wait for the <Beep> before speaking 
a command 

 

 

 

MAIN MENU FUNCTIONS 

Call – 

to place a call by the name entered into the 

phonebook.  This method will also ask you to 
confirm the location (cellular, work ,etc.) 

 
From the Main Menu, select the desired function.  

VControl

 prompts you with “

Ready

” <Beep> Say 

‘DIAL, PHONEBOOK, CALL, TOWING 
ASSISTANCE, SETUP, REDIAL, EMERGENCY, 
CANCEL’” 

 

Dial – 

Used to call a number not in your phonebook 

by simply speaking the numbers in sequence or by 
block (a block is area code, then the three digit city 
code and then the four digit number – (123-456-
7890). 

 
Simply speak the desired function name and the unit 
will respond appropriately.  Note: 

 

 

 

9

 

10 

Redial – 

to redial the last number called. 

 

Phonebook – 

is the unit’s stored memory of 32 

numbers, stored by name – each name can have up 
to four different locations (home, work, cellular, 
pager). 
 

Setup – 

this allows you to access all of the set-up 

functions such as phone pairing, confirmation 
prompts or language. 
 

Cancel – 

this will disconnect a current dialogue 

session with the unit when invoked from the main 

menu – from any other place in the command 
structure it will return to the main menu and the 
“ready” prompt. 
 

Emergency – 

the emergency function allows you 

with one simple command to quickly dial 

911.

 

 

Towing Assistance – 

the towing assistance 

command allows you to quickly connect a Roadside 
Assistance Service number of your choice.  This 
number can be programmed to your Automobile 
Club or vehicle manufacturer’s specification. 

 

 

Содержание VControl



















Отзывы: