vc999 TR2, Перевод оригинальной инструкции по эксплуатации, Страница: 80 / 99

29.11.2013
80/99
Dryer VC999 TR2
Repairs
Art. No. 594.301
12.1.1 Replacing fuses
12.1.2 Replacing the display
Procedure
1. Set the main switch to 0.
2. Disconnect the machine from the power supply.
3. Use the triangular socket spanner to open the
electric cabinet.
4. Replace the blown fuse or reset a tripped
thermal circuit breaker.
(1) Fuse 2F5.2: 2AT (left)
(2) Fuse 2F6: 3.15AT (right)
Fig. 12/1
POWER
BATT
ERROR
RUN
2
1
Procedure
1. Set the main switch to 0.
2. Disconnect the machine from the power supply.
3. Unscrew the two star knobs (Fig. 3/1, pos. 9) to
unlock and raise the service door.
4. Remove the cover plate from the inside (1). Use
a screwdriver to unscrew the eight screws. This
provides direct access to the inside of the
control panel.
5. Loosen all the cable and plug-in connections on
the display.
6. Unscrew the bolts on the display mounting and
remove the display from the front of the
housing.
To install proceed in reverse order.
Fig. 12/2
Ensure that no cables are trapped when installing the display!