vc999 TR2, Перевод оригинальной инструкции по эксплуатации, Страница: 63 / 99

Dryer VC999 TR2
Operating messages and faults
29.11.2013
63/99 Art. No. 594.301
F25 Error sensor 1
Bar left

Over-large product in the
machine

Governor not moving up-
ward

Sensor defective

Insert properly sized product

Check servo drive

Replace sensor 1 (see
"10.2.1.3 Throughput schema-
tics")
The defect mode can be activated
on an interim basis to keep pro-
duction running.
(see Chapter "9.6.1.2 Further
functions" under defect mode/
communication)
F26 Error sensor 2
Bar left

Over-large product in the
machine

Governor not moving up-
ward

Sensor defective

Insert properly sized product

Check servo drive

Replace sensor 2 (see
"10.2.1.3 Throughput schema-
tics")
The defect mode can be activated
on an interim basis to keep pro-
duction running.
(see Chapter "9.6.1.2 Further
functions" under defect mode/
communication)
F27 Error sensor 3
Bar left

Sensor defective

Replace sensor 3 (see
"10.2.1.3 Throughput schema-
tics")
The defect mode can be activated
on an interim basis to keep pro-
duction running.
(see Chapter "9.6.1.2 Further
functions" under defect mode/
communication)
F28 Error in rotation
direction, left
Rotation direction signal for ser-
vo drive faulty (reference switch
defective). Switch reference switch
F31 FL
Transport
Conveyor belt too tight. Check the transport area
Gear motor defective. Read error code and contact the
VC999 Customer Service Depart-
ment.
No. Error message Possible cause Remedy