vc999 TR2 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 99

vc999 TR2 Скачать руководство пользователя страница 11

Dryer VC999 TR2

Safety and warranty

29.11.2013

Art. No. 594.301

2

Safety and warranty

2.1

Explanation of the safety instructions

All the safety instructions in this operating manual provide the operator with advance warning of
potential dangers, potential damage to the machine and the peripheral equipment, as well as error-
free, productive work.

Any sections which are of particular importance to the operator are marked with a warning symbol.
The operator must read and comply with this information.

Meanings:

DANGER

Indicates a hazardous situation which, if not avoided, will result in death or
serious injury!

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or
serious injury!

CAUTION

Indicates a hazardous situation which, if not avoided, may result in minor or
moderate injury!

Indicates a situation which, if not avoided, may result in considerable damage
to equipment or the environment!

«
...
9
10
11
12
13
...
»

Содержание TR2




































































































Отзывы:

Нет отзывов