vc999 TR2, Перевод оригинальной инструкции по эксплуатации, Страница: 74 / 99

29.11.2013
74/99
Dryer VC999 TR2
Maintenance
Art. No. 594.301
11.2.1 Checking the belt tension
11.2.2 Check belt tension on blower
A wire mesh conveyor belt (2) rotates around the
belt cartridge (1). A tensioning device over two ax-
les (3) ensures the correct wire mesh conveyor belt
tension (A) is permanently maintained.
The wire mesh conveyor belt must be replaced im-
mediately if the axles (2) are in direct contact with
the guide grooves (B) when the conveyor belt is op-
erating with a load.
Procedure
1. Open the service door (Fig. 3/1, pos. 12).
2. Check the belt tension on the belt cartridge (1).
Situation A:
The belt tension is correct.
Situation B:
The belt tension is not correct. The wire mesh con-
veyor belt must be replaced by the VC999 service
team.
Fig. 11/6
The belt tension is measured using the included
gauge. It is comprised of a scale (1) and a pointer
(2). Operate the device at the pressure mark (3) us-
ing one finger.
Fig. 11/7
1 2 3