14
Viewing Unit Parameters
The
Status
menu lists information related to the Transmitter and Receiver you are working with.
The following parameters are displayed:
•
Paired Tx:
The name of the Transmitter with which the Receiver is paired.
•
SN:
Serial number of the paired Transmitter .
•
Rx FW Ver:
Firmware version of the Receiver.
•
Tx FW Ver:
Firmware version of the Transmitter.
IMPORTANT
For the system to perform as expected, the firmware version in the Receiver and
the Transmitter must be the same.
Alert and System Messages
The tables below describe messages that may appear on the monitor connected to the
Receiver's SDI or HDMI port.
Alert Messages – Overlaid on Video During Link
These alert messages may be displayed on top of the live video:
Alert
Description
Out of Range
A link still exists, but Transmitter is too far from the Receiver. This message appears regardless of
whether
OSD display
is enabled.
When the Transmitter is within range, the video signal is automatically reacquired.
