VAT 95248-PAGI-0002, Инструкции по установке, эксплуатации и обслуживанию

Страница: 31 / 81

Installation, Operating & Maintenance Instructions
Series 612 DN 250 (I.D. 10”), EtherCAT
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
282408EB
2012-04-23
31/81
2. Range of pressure and position values (optional)
The «range of pressure and position values» can be adjusted. That means:
For position values, the value for valve position
“CLOSE”
and the valve position
“OPEN”
can be set to a other
ones then the default 0...100’000 is.
For pressure values, the value for physical 0 Volt and 10 Volt of the sensor output can be set to other values
then the default 0...1’000’000 is.
The range of pressure and position values
can be configured by ‘Control View’, ‘Control Performance Analyzer’ or
‘Universal Hyper Terminal’.
The
«set-command» is: «s:24xxy to z» .
y: lower scale value
, floating point, entry with a point ‘.’ and ‘-‘ for negative values possible
z: upper scale value
, floating point, entry with a point ‘.’ and ‘-‘ for negative values possible
xx: signal number in the buffer
xx Value
Default range Min/Max range
Default lower
scale value
Default
upper scale
value
Min lower
scale vlaue Max upper
scale value
00 Pressure 0
1'000’000
-
1'000’000 1'000’000
01 Pressure sensor 1 0
1'000’000
-
1'000’000 1'000’000
02
Pressure sensor 2 (optional, only in
case of 2 sensor version)
0
1'000’000
-
1'000’000 1'000’000
03 Position 0 100'000 -
1'000’000 1'000’000
04 Not used
– reserved
- - - -
05 Cluster valve position
– not used
0 100'000 -
1'000’000 1'000’000
06 Pressure setpoint 0
1'000’000
-
1'000’000 1'000’000
07 Position setpoint 0 100'000 -
1'000’000 1'000’000
08 Not used
– reserved
- - - -
09 Not used
– reserved
- - - -
10 Not used
– reserved
- - - -
11
Cluster valve freeze position
setpoint
– not used
0 100'000 -
1'000’000 1'000’000
The
«get-command» is: «i:24xx» . The answer returns the range

«i:24xxytoz». The xx is the value number, y value is
the current lower scale value of buffer and value z the upper scale value.
The format of y and z has following syntax: _ _ _ _ _ _ _ _._ _ _ _ _