161
English
Ocean Section
Connecting the valve actuator
of the post-treatment coil
The coil section can be used to cool the air
before release into the room, using a 2-pipe
system for cooling only, or to cool/heat, using
a reversible 2-pipe system. It is equally
possible to connect a dual coil, in the case
of a 4-pipe system, or a cooling coil in com-
bination with a post-heating electric coil.
The sections of post-treatment valves can
be managed by the main board. The valves
are open when the setpoint of the winter or
summer cooling temperature on return air
is not reached and closed if it is.
Air flow
Energy Plus
Connecting Duct
Ocean air handling section with 4 row coil
– Ocean
The coil section is equipped with a 4-row
heat exchange coil suitable to be fed with
chilled water.
When ordering indicate the connections side
of the coil section; in the picture the connec-
tions side is on the left.
this is achieved by using the special Con-
necting Duct.
AUXILIARY SECTIONS
The Energy Plus heat recovery units can be
matched with the Ocean coil section or with
the Ocean SFE section;
man_Energy Plus IT-UK-FR-DE-ES-NL-FM_Ultima_Rev_0721.indd 161
man_Energy Plus IT-UK-FR-DE-ES-NL-FM_Ultima_Rev_0721.indd 161
24/01/2022 16:07:20
24/01/2022 16:07:20
