Vari Hurricane F-530, Инструкция по эксплуатации

Страница: 12 / 37

Hurricane F-530
with leading wheel
12
5.5 Machine stop.
If you wish to stop the machine travel, release the lever on the left handlebar grip. The
machine will stop moving but the blade will still turn. The cutting blade drive will be
switched off after release of the lever on the right handlebar grip. The safety brake will stop
the blade.

Prior to carrying out any activities in the near vicinity of the machine, switch off the
engine and wait until the cutting blade stops! Always switch the engine off before
leaving the machine!

Never let the engine running at maximum speed or idling with the cutting blade
drive clutch released and with the released clutch of travel wheels drive for a long
time! Machine drive components (V-belt, belt pulley, clutch pulley, etc.) might
suffer damage!
If you wish to switch the engine off, do it by shifting the lever to the „ STOP " position.

In the case of any critical situation, release your hold on the handlebars without any
delay. The levers will return to their zero position, the machine and the cutting
blade will stop (while the engine is still running at set-up revolutions; this is why it is
to be switched off by shifting the lever to the „STOP“ position as soon as possible!)
5.6 Working with the machine.
5.6.1 Working width of the machine.

Before using the machine, the stand to be cut must be cleared of solid bodies (such
as stones, wires, loose construction debris, etc.), which could be flinging up or which
Position
STOP
- engine stands still
Position MIN (turtle)
– engine runs idle
Position MAX (hare)
– engine runs at maximum speed
Position CHOKE
(for cold start of the engine
only) – engine runs on choke