Vari Hurricane F-530, Инструкция по эксплуатации

Страница: 6 / 37

Hurricane F-530
with leading wheel
6

When the machine is in operation, all other persons (children in particular) and animals
have to be outside the machine’s working space. The machine operator can continue
working only after they have been shown out to a
safe
distance (see Pictograph 6).
NOTE: The outer safety zone A around the inner working zone B is specified in standards EN 12733
and CSN EN 12733. Entry into the working zone is to be prevented by using appropriate prohibitory
signs. Distance between the individual sides of zones A and B must not be less than 50 m. Should the
dangerous zone of machine operation be entered by a person or animal, the machine operator must
release the cutting implement drive lever without any delay and wait with the further work until the
zone is clear again.

Removal of any protective equipment and casings from the machine is forbidden.

The safe slope accessibility of the machine is 10°. Maximum inclination of the engine at
work is 20° for a long-time operation and 30° for a shorter time (up to 1 minute).
NOTE: The machine should be preferably not used on wet grass. The terrain you are moving
on must be always safe. Do the work while walking not running. Be particularly careful when
changing direction on the slope. Cutting on steeply inclined slopes should be prevented. If
you fall, do not hold the machine but release your grip on it.

All kinds of the machine repair, adjustment, lubrication and cleaning are to be made with
the machine switched off and spark plug cable disconnected.
3.2 Declared and guaranteed noise and vibration values.
Declared emission level of acoustic pressure A at operator’s site L
pAeq,T
= 88 + 1 dB
(according to CSN EN 12733, Attachment B and CSN EN ISO 11 201)
Guaranteed level of acoustic performance of the machine L
WA
= 98 dB (according to
Government Regulation No. 9/2002 Gaz.)
Declared sum of accelerated vibrations transmitted onto operator’s hands/arms a
hv
= 13,8 +
11,1 [m.s
-2
] (according to CSN EN 12733, Attachment C and CSN EN 1033).
3.3 Safety pictographs.
The user is obliged to maintain the pictographs on the machine legible and to provide for their
replacement in the case of damage.
Pictograph No. Description of the safety information
1
Putting one’s hands into the V-belt working space is prohibited – danger of nip.
Safe slope accessibility.
2
Guaranteed level of machine’s acoustic performance.
3
Manufacturing label.
4 Arrow for the direction of tool rotation – to the right.
5
Instructions for use to be studied prior to machine operation and maintenance.
During the machine maintenance the conductor is to be disconnected from the spark plug.
Putting one’s hands or feet into the cutting blade working space is prohibited – danger of
limb cut (off).
6
Entry forbidden for other persons and animals. Minimum safe distance from the machine.
Danger of injury by flying-off material fragments and flung objects. Other persons and
animals to be kept at a safe distance from the machine.
7
Machine travel switch. “0” = machine stands still, “1” = machine travels
8
Cutting blade drive switch. “0” = blade does not turn, “1” = blade in rotation.