C
HAPTER
3. M
AINTENANCE
P
ROCEDURES
3-43
02.9631.0010
CONFIDENTIAL
15 Jan 98
Step 3.
Disconnect brightness/focus bulkhead and color filter bulkhead
yoke termination board connectors.
a. At yoke termination board (Figure 3-2), disconnect the
following IDC connectors:
1. Brightness/filter bulkhead four-pin connector from
header marked IRIS E.T. (rev. C board) or DIM EOT
(rev. D board).
2. Brightness/filter bulkhead six-pin connector from header
marked DIM IRIS (rev C board) or DIM (rev. D
board).
Figure 3-2. Yoke Termination Board Connector Locations
3. Brightness/filter bulkhead six-pin connector from header
marked LENS.
4. Color filter bulkhead two-pin connector of assembly
from header marked O.T. (rev. C board) or BOT (rev.
D board).
5. Color filter bulkhead four-pin connector marked I from
header marked W1 E.T. (rev. C board) or WH1 (rev. D
board).
6. Color filter bulkhead four-pin connector marked II from
header marked W2 E.T. (rev. C board) or WH2 (rev. D
board).
7. Color filter bulkhead six-pin connector marked I from
header marked W1 (rev. C board) or WH1 (rev. D
board)
