![background image](http://html1.mh-extra.com/html/vari-lite/vl2b/vl2b_service-manual_3526154090.webp)
3-44
V
ARI
*L
ITE®
-
VL2B
AND
VL2C
S
POT
L
UMINAIRE
S
ERVICE
M
ANUAL
CONFIDENTIAL
02.9631.0010
15 Jan 98
8. Color filter bulkhead six-pin connector marked II from
header marked W2 (rev. C board) or WH2 (rev. D
board).
Step 4.
Remove color filter bulkhead.
a. At color filter bulkhead assembly, remove two 6-
32x3/8"PPB screws that secure shroud and color filter
bulkhead to head and remove shroud.
b. Slide out color filter bulkhead from head.
Step 5.
Remove brightness/focus bulkhead.
a. For VL2B luminaire, remove two 6-32x3/8"PPB screws
and 0.434 inch OD x 0.156 inch ID x 0.062 inch thick flat
washers that secure brightness/focus bulkhead to side rails.
b. For VL2C luminaire, remove two 6-32x3/8"PPB screws
and two bulkhead retaining adapters that secure
brightness/focus bulkhead to side rails.
c. Slide out brightness/focus bulkhead from head.
Step 6.
Replace brightness/focus bulkhead by doing Steps 2 through 5
in reverse.