![background image](http://html1.mh-extra.com/html/vari-lite/vl2b/vl2b_service-manual_3526154052.webp)
3-6
V
ARI
*L
ITE®
-
VL2B
AND
VL2C
S
POT
L
UMINAIRE
S
ERVICE
M
ANUAL
CONFIDENTIAL
02.9631.0010
15 Jan 98
Step 6.
Install cheater cable (local 3-pin power connector on one end
and a 9-pin CPC connector on the other) to supply power to
luminaire. Connect 9-pin CPC of cheater cable to Series 200
connector at luminaire chassis. Luminaire cooling fans will run
and LCB LED will blink. The luminaire will not calibrate.
Step 7.
Set thumbwheel to desired test. Refer to Test Results Charts
section.
3.1.1.4
EPROM Test Code Description
The following sections describe the LED indicators and the expected
results of each individual test code.
Test Codes
With test EPROM’s installed, the following tests may executed by selecting
the proper thumbwheel position:
Thumbwheel
Number
Test Executed
000
CIB
001
Pan servo
002
Tilt servo
003
Beam iris
004
Lens
005
Brightness iris
006
Color wheel 1 test w/sensor
007
Color wheel 2 test w/sensor
008
Gobo wheel test w/sensor
009
Combined test of 001 thru 008
016
Color wheel 1 continuous cycle
017
Color wheel 2 continuous cycle
018
Gobo wheel continuous cycle
019
Continuous cycle of all 3 wheels
020
Lamp start/on
021
Lamp standby
022
Lamp off
Any other switch settings have no effect.