Vari Lite VL10 BeamWash, Руководство пользователя

Страница: 47 / 85

33
VL10 BeamWash Gobo/Effects Control
Overview of Gobos used in VL10 BeamWash
Due to the immense energy and light produced by VL10 BeamWash, Vari-Lite recommends to
users and owners of this fixture follow the guidelines outlined below when loading gobos in any
of the two rotating gobo wheels and one fixed gobo wheel.
Gobo Use and Positioning
Vari-Lite has purposely selected a set of standard gobos and gags for this fixture and positioned them
within the fixture to offer optimum versatility / performance. The gobos supplied - in the standard
factory configuration - have been tested in their respective original positions to protect their service life.
Note: For standard factory goboloads and position, please refer to the information contained in
“Gobo Wheels” on page 34 of this manual.
Users can load their own patterns (gobos). When using custom gobos, Vari-Lite recommends the
following guidelines:
Rotating gobo wheel 2 and VLFX Wheel have been designated the effects wheel. Should only
house clear type gags or gobos that permit minimum unabated light transmission.
Rotating gobo wheel 2 Gobos are Metal, VLFX Wheel Gobos are Glass.
Note: Vari-Lite cannot guarantee the service life of any custom gobos when used in conjunction
with this fixture. Owners and users employing custom gobos do so at their own risk.
Note: Animation wheel(VLFX) is locked out from being inserted into the beam when aperture
wheel(gobo wheel1) is being used under beam mode.
Note: Aperture wheel(gobo wheel1) is locked out from being inserted into the beam when
animation wheel(VLFX) is being used under beam mode.
OPERATION : VL10 BeamWash DMX MAPPING
3