Vari Lite VL10 BeamWash Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 85

background image

9

Special Warnings

Exceptional Safety Information for the VL10 BeamWash

The light intensity and power density of the VL10 BeamWash exceeds that of other fixtures
typically used in this application. The warnings and cautions that follow are critically
important to the safe operation of this fixture. This product is for commercial use only by
trained professionals only.
If you have any questions about the safe installation and operation of the VL10 BeamWash,
please contact Vari-Lite customer service at 1-877-VARI-LITE (1-877-827-4548),
+1-214-647-7880, or

[email protected]

.

WARNING: Light Beam Projects Intense Heat. Do not illuminate objects within 15 m
(49.21 feet) of the VL10 BeamWash. Objects within this range can scorch, melt, or ignite
from the heat projected by the light beam.

WARNING: High Intensity Light Output. Do not look directly into the light beam. Avoid
looking at nearby surfaces illuminated by the beam. It is hazardous to operate luminaires
without lens or shield. Shields, lenses, or ultraviolet screens must be changed if they have
become visibly damaged to such an extent that their effectiveness is impaired. For example,
by cracks, deep scratches, or coating breakdown.

WARNING: Hot Exterior Surfaces. The exterior surfaces of the luminaire can get very hot
- up to 120ºC (248ºF). Do not touch any surface of the luminaire while it is operating. Keep
all combustible materials a minimum of

200

mm (7.87 inches) away from the luminaire. To

maintain cooling fan operation after the lamp is doused, keep the luminaire powered on for
10 minutes. Wait an additional 10 minutes before touching the luminaire.

WARNING: Operating Environment. Do not operate the luminaire when the ambient
temperature exceeds 45ºC (113ºF).

WARNING: Approved lamp Type. Use only approved lamp types in VL10 BeamWash.
Users can check the latest version of Vari-Lite Technical Notice TN-248, on the Vari-Lite
web site, for all approved lamp.

VARI

LITE VL10 BeamWash User’s Manual

«
...
21
22
23
24
25
...
»

Содержание VL10 BeamWash






















































































Отзывы:

Нет отзывов

Похожие инструкции для VL10 BeamWash

Бренд: Rabe Страницы: 65

Бренд: QBC Diagnostics Страницы: 65

Бренд: Halyard Страницы: 88

Бренд: HALDER Страницы: 2

Бренд: Hällde Страницы: 40

Бренд: Hällde Страницы: 6

Бренд: Ognibene Страницы: 28

Бренд: Hameg Страницы: 24

Бренд: Vaisala Страницы: 118

AquaPure Ei Series

Бренд: Jandy Страницы: 4

AquaPure Ei Series

Бренд: Jandy Страницы: 8

Jandy Pro Series

Бренд: Jandy Страницы: 16

Бренд: Keithley Страницы: 79

Бренд: Kayakpro Страницы: 17

Бренд: Yoshitake Страницы: 11

9NP-B7524 Series

Бренд: Nautilus Страницы: 2

Be strong NS 700X

Бренд: Nautilus Страницы: 34

Бренд: Nautilus Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды