Vari Lite VL10 BeamWash Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 85

Vari Lite VL10 BeamWash Скачать руководство пользователя страница 6

vi

WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST EXCESSIVE
EXPOSURE TO UV RADIATION

1.

Many VARI LITE luminaires use a lamp that produces UV radiation. DO NOT look

directly at lamp.
2.

It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet

screens shall be changed if they have become visibly damaged to such an extent that their
effectiveness is impaired. For example, by cracks or deep scratches.

WARNING: INSTRUCTIONS FOR PROTECTION AGAINST INJURY TO PERSONS
1.

Exterior surfaces of the luminaire will be hot during operation. Use appropriate safety

equipment (gloves, eye protection, etc.) when handling and adjusting hot equipment and
components.
2.

Luminaires will have a hot lamp when operating. Disconnect power and allow lamp to

cool before replacing.
3.

Lamp emit ultraviolet radiation which can cause serious skin burn and eye inflammation.

Additionally, lamp operate under high pressure at very high temperatures. Should the lamp
break, there can exist a danger of personal injury and/or fire from broken lamp particles being
discharged.
4.

Wear eye protection when relamping.

5.

Appropriate safety equipment (gloves, eye protection) should be used when handling

damaged lamp.
6.

If lamp is touched with bare hands, clean lamp with denatured alcohol and wipe with

lint-free cloth before installing or powering up the luminaire.
7.

The lamp shall be changed if it has become damaged or thermally deformed.

WARNING: RF INTERFERENCE
1.

This is a Class A product. In a domestic environment this product may cause radio

interference, in which case, the user may be required to take adequate measures.

LAMP CHARACTERISTIC CONSIDERATIONS
1.

Lamp require a period of time to relight after a power interruption or a severe voltage dip.

In some cases, lamp will automatically relight after it has cooled depending on Power-Up
State configuration setting.
2.

Burning position is Universal.

VARI

LITE VL10 BeamWash User’s Manual

«
...
4
5
6
7
8
...
»

Содержание VL10 BeamWash






















































































Отзывы:

Нет отзывов