PRE-FLIGHT:
77
Problem
Indicator
Operator Response (P) / Cooperator
Response (C)
Propeller(s)
not rotating
Propeller
does not
freely make 2
rotations
when spun
with finger
1.
(C) Check propellers for damage
(i.e. cracks).
2.
(C) Check for obstruction (dirt,
sand, etc.) in the motor.
3.
(C) Replace rotor set.
Launch
conditions not
met
Vision GCS
feedback
1.
(P) Click “!” in upper right on
Vision GCS to learn more.
2.
(C) If “Motor error”, confirm that
props are clear and spin freely.
3.
If props do not spin freely,
replace the rotor set.
4.
(P) If there is no clear corrective
action, try again 3x times.
5.
(C) Power cycle Vesper.
6.
(P) Try again.
Image blurry
Image blurry
1.
(C) Clean lenses by using brush to
remove dust or water.
Magnetometer
issue
Error message
on Vision GCS
or general
failure to
launch
1.
(C)/(P) Move Vesper and Vision
GCS away from any magnetic or
metal objects.
2.
(C)/(P) Use the Field Case Takeoff
method.
3.
(C) Power cycle Vesper and Vision
GCS (UPCI).
Interface
frozen
Unresponsive
to commands
after
repeated
1.
(P) Restart QGC.
2.
(P) Restart Vision GCS.
3.
(C) Restart Vesper.
Содержание Vesper UAS
