●
Ground Takeoff:
1.
When a flat surface is available Vesper can take off directly
from the ground.
2.
Always ensure blades have clearance to spin freely prior to
takeoff.
Note:
ground takeoff mode is less desirable than the alternatives,
since it increases the chance of dust/dirt getting on the camera lens.
SAFETY ROTOR SET CONFIGURATION:
All Recon Rotor Set launch/landing options apply to the Safety Rotor Set.
Additionally, due to the reduced risk of laceration from the blades, hand
takeoff/landing is also possible with the Safety Rotor Set.
●
Hand Takeoff:
1.
Hold Vesper from above with one thumb and forefinger
pressing against opposite sides of the battery.
2.
Set feet in an active stance, so you are prepared to exit the fly
area quickly.
3.
When hands and feet are set, inform the operator you are
ready for takeoff.
4.
Once the blades are spinning, quickly remove your hand away
from the propellers vicinity, and jog 20 feet away from launch
location.
CAUTION:
the hand takeoff method can be dangerous and should only
be performed by experienced personnel.
●
Hand Landing:
1.
Push the Land button.
2.
Grab Vesper from waist level. Adjust hand until it is securely
holding the battery.
3.
Once the co-operator or operator is securely holding the
battery, lift Vesper upwards to shut off the propellers.
Note:
if the co-operator grabs Vesper in flight, the operator will need
to push the altitude control stick downwards until blades power off
65
Содержание Vesper UAS
