Vanderbilt
13
A6V10200077_e
Installation Instructions
08.02.2016
The jumper connects pins 7 and 10 on terminal X1. Instead of setting the jumper to
ON
, an End of
Line (EOL) resistor can be used in the last indicator module.
GMYA7-A
A
– Terminal block X1
B
– Terminal block X2
C
– Jumper
5.7
Configure the key module
10. Configure the day/night polarity for the key module with the DIP switch.
GMYA7-S
A
– Terminal block X1
B
– Terminal block X2
C
– DIP switch
Day/night input: Set the polarity with the DIP switch.
Active high = 0 V applied
Active low = 0 V removed
Function according to VdS
Night = Active high
Inverted
Night = Active low (0 V)
