Vanco Evolution EVMX4K08, Руководство пользователя

Страница: 13 / 24

www.vanco1.com 800.626.6445 13
Control far-end device from Local
Note: The IR receiver connected to IR IN must be with IR carrier
The IR signal received from IR ALL IN port will be transmitted to all the eight far-end HDBaseT receivers
connected to HDBaseT ports of the 4K HDBaseT 8x8 Matrix Switcher. See as below:
Control far-end device through IR ALL IN port
Control local device from remote
User can control local source devices with their IR remote from remote too. When using, the IR signal
received by the HDBaseT receiver will be transmitted to the corresponding IR OUT port of the 4K HDBaseT
8x8 Matrix Switcher. See below:
Receiver 1 Receiver 2 Receiver 3 Receiver 4 Receiver 5 Receiver 6 Receiver 7 Receiver 8
HDMI OUT HDBT IN
Tx Rx
RS232 IR IN IR OUT
PoC
HDMI OUT HDBT IN
Tx Rx
RS232 IR IN IR OUT
PoC
HDMI OUT HDBT IN
Tx Rx
RS232 IR IN IR OUT
PoC
HDMI OUT HDBT IN
Tx Rx
RS232 IR IN IR OUT
PoC
HDMI OUT HDBT IN
Tx Rx
RS232 IR IN IR OUT
PoC
HDMI OUT HDBT IN
Tx Rx
RS232 IR IN IR OUT
PoC
HDMI OUT HDBT IN
Tx Rx
RS232 IR IN IR OUT
PoC
HDMI OUT HDBT IN
Tx Rx
RS232 IR IN IR OUT
PoC
HDTV
IR Transmitter
HDTV
IR Transmitter
HDTV
IR Transmitter
HDTV
IR Transmitter
HDTV
IR Transmitter
HDTV
IR Transmitter
HDTV
IR Transmitter
HDTV
IR Transmitter
DVD
IR Remote