www.vanco1.com
800.626.6445
7
CONNECTION DIAGRAM
CONNECT AND OPERATE
1. Connect HDMI sources (e.g. STB or Bluray) to the HDMI inputs of the 4K HDBaseT 8x8 Matrix Switcher
with HDMI cables.
2. Connect HDBaseT receivers (e.g. HDMI Twisted Pair PoC Receiver) to the HDBaseT Output ports with
twisted pair.
3. Connect HDMI displays (e.g. HDTV) to HDMI outputs of the 4K HDBaseT 8x8 Matrix Switcher or the
receivers with HDMI cables
4. Connect speakers/zone amp/AV Receiver, etc. to AUDIO output ports
5. Connect the RS232 port of control device to the RS232 port of either the EVMX4K08 or far-end
receivers. RS232 signal can be transmitted bi-directionally between 4K HDBaseT 8x8 Matrix Switcher
and far-end receivers.
6. 4K HDBaseT 8x8 Matrix Switcher can collect IR signal sent by the included IR remote via its built-in IR
sensor or through external IR receiver connected to the IR IN/ IR EYE/ IR ALL IN port. The IR signal can be
transmitted bi-directionally between 4K HDBaseT 8x8 Matrix Switcher and far-end receivers.
7. Connect an AC 100V~240V power outlet and the 4K HDBaseT 8x8 Matrix Switcher with the AC power
cord.
NOTICE
1. Connect HDBT ports of 4K HDBaseT 8x8 Matrix Switcher and far-end receiver with straight-through cable.
2. IR receivers connected to IR IN& IR ALL IN should be with carrier. If not, send command %0900. or
%0900. to activate native carrier mode or force carrier mode in the IR matrix launched between 4K HDBaseT
8x8 Matrix Switcher and far-end receivers.
1. System should be installed in a clean environment and has a proper temperature and humidity.
2. All of the power switches, plugs, sockets and power cords should be insulated and safe.
3. All devices should be connected before power on.
