www.vanco1.com
800.626.6445
17
Controlled by PC(s) in LAN
Connect 4K HDBaseT 8x8 Matrix Switcher, a router and several PCs to setup a LAN (as shown in the following
figure). Set the network segment of 4K HDBaseT 8x8 Matrix Switcher to the same as the router’s, then PCs
within the LAN are able to control 4K HDBaseT 8x8 Matrix Switcher.
Follow these steps to connect the devices:
Step1. Connect the TCP/IP port of the 4K HDBaseT 8x8 Matrix Switcher to Ethernet port of PC with twisted
pair.
Step2. Set the PC’s network segment to the same as the 4K HDBaseT 8x8 Matrix Switcher’s. Do please
remember the PC’s original network segment.
Step3. Set the 4K HDBaseT 8x8 Matrix Switcher’s network segment to the same as the router.
Step4. Set the PC’s network segment to the original ones.
Step5. Connect the 4K HDBaseT 8x8 Matrix Switcher and PC(s) to the router. PC(s) within the LAN is able to
control the 4K HDBaseT 8x8 Matrix Switcher asynchronously.
Then it’s able to control the device via GUI.
GUI for TCP/IP control
4K HDBaseT 8x8 Matrix Switcher provides with built-in GUI for convenient TCP/IP control. GUI allows users to
interact with 4K HDBaseT 8x8 Matrix Switcher through graphical icons and visual indicators.
Type 192.168.0.178 in your browser, it will enter the log-in interface shown as below:
There are 2 selectable usernames – admin (default password: admin) and user (default password: user). Log
in as admin can access more configuration interfaces than user.
Enter username and the right password. See next page for a brief introduction to the interfaces.
