www.vanco1.com
800.626.6445
5
1. Firmware: Micro USB port for updating firmware
2. Power Indicator: Illuminates green when power on
3. ACT: Serial Communication
4. IR: In-built IR sensor, receive IR signals sent from IR remote.
5. LCD Screen: Display real-time operation status.
6. INPUTS/ Menu buttons: Normal mode: Back-lit buttons, ranging from “1” to “8”
7. OUTPUTS buttons/ EDID Management buttons: Normal mode: Back-lit buttons, ranging from “1” to “8”.
Output 1~4 support synchronous local HDMI output. EDID mode: press and hold EDID button for 3
seconds or more to enter this mode, buttons 1~6 correspond to the 6 embedded EDID data separately.
8. ALL: Select all inputs/outputs. Example: To transfer both AV and IR signals from input to all zones.
Operation: Press buttons in this order: INPUT#, ALL, ENTER.
9. EDID management button: Enable input port to manually capture and learn the EDID data of output
devices. Example: Input channel No.2 captures and learns the EDID data of output channel No.4.,
Operation: Press buttons in this order: EDID, INPUT #, OUTPUT # ENTER.
10. CLEAR: Withdraw an operation like switching output channel, learning EDID data before it comes into
effect. Meanwhile, the matrix will return to the previous status.
11. ENTER: Confirm operation. Press and hold it for 3 seconds to enter in Inquiry mode.
FRONT PANEL DESCRIPTIONS
1
5
2
4
6
7
9
11
8
3
10
