www.vanco1.com
800.626.6445
9
This matrix features EDID management to maintain compatibility between all devices. It can be controlled via EDID learning
and EDID presets.
EDID Learning (from output):
One input port learns the EDID data of one output port
Operation: Press EDID, INPUTS #+OUTPUTS #+ENTER. Example: Input 2 learns EDID data from output 4
All input ports learn EDID data from one output port
Operation: Press EDID, ALL+OUTPUTS #+ENTER
Example: All input ports learn EDID data from output 4
Note: Indicators of the pressed buttons will blink green for three times if the conversion is done, then it will be off. If the
conversion failed, they will be off immediately.
EDID Management:
There are six types of embedded EDID data. The chart below illustrates the detailed information of the embedded EDID data:
Output Button EDID Data
1
1080P LPCM
2
720 LPCM
3
3840x2160 LPCM
4
1080P Dolby/Dts
5
3840x2160 Dolby/Dts
6
4096x2160 Dolby/Dts
Format: Press and hold EDID for 3 seconds, INPUT # + OUTPUT # +ENTER.
Operations:
Set EDID data for one input
Operation: Press EDID (hold for 3 seconds to enter in EDID setting status),
INPUT # +OUTPUTS # +ENTER.
Example: Set the EDID data of INPUT 4 to the forth type of embedded EDID data:
Press EDID (hold for 3 seconds)
.
Note: If the conversion is successful, indicators of the pressed buttons will blink green for three times at normal speed; if the
conversion failed, they will blink for three times quickly.
EDID
