Vanair Air N Arc All-in-One Power Systems 300, Руководство по эксплуатации и список запасных частей

Страница: 101 / 204

AIR N ARC
®
300 SERIES ALL-IN-ONE POWER SYSTEM
®
SECTION 6: MAINTENANCE
090010-OP_r0 PAGE - 83
3. Loosen and remove the lock nut [ B ] securing
the grub screw [ C ] in position.
4. Loosen the grub screw [ C ] to relieve any
spring tension in the valve.
5. Loosen and carefully remove the valve body
[ D ], which holds the internal parts in place.
The internal parts will be freed to drop out
with the removal of the valve body.
6. Wipe internal surface of valve body [ D ] with a
clean cloth.
7. Consult Figure 6-12 , and re-assemble the kit
by replacing all old parts with corresponding
part provided in the kit.
8. Once the kit parts (parts E through L ) have
been situated in correct order into the valve
KEY DESCRIPTION KEY DESCRIPTION
A MINIMUM PRESSURE/CHECK VALVE G SPRING GUIDE
B LOCK NUT H PRESSURE SPRING
C GRUB SCREW (COMPLETE) J PISTON (WITH O-RING)
D VALVE BODY K SPRING
E O-RING L VALVE HEAD (WITH O-RING)
F O-RING
Figure 6-12: Minimum Pressure / Check Valve Rebuild
E
F
G
H
J
K
L
D
C
B
A
- ASSEMBLY PART
- KIT (REPLACEMENT) PART