Vanair 050817, Руководство по эксплуатации и список запасных частей

Страница: 117 / 184

SECTION 6: MAINTENANCE AIR N ARC
®
200 SERIES ALL-IN-ONE POWER SYSTEM
®
PAGE - 95 090019-OP_r0
To service the fuel system the engines have been
provided with two in-line fuel filters (
Figure 6-22 ) to
prevent harmful contamination from entering the module.
Be sure to use approved 70 micron (primary) and 10
micron (secondary) filter replacements respectively.
Install according to the directional arrows appearing on
the fuel filter containments (Refer to the Engine
Operator’s Manual for specific procedure).
6.5.9.5 ENGINE COOLER MAINTENANCE
Refer to Figure 6-23 . Periodically as per Section 6.3,
IMPORTANT
Failure to use the proper replacement
filters can result in engine damage, and
void the warranty.
TOOLS/ITEMS NEEDED
REPLACEMENT
PART(S)
Wrench None
Brush
Compressed Air Source
(External)
KEY DESCRIPTION ORDER REPLACEMENT NUMBER:
A IN-LINE FUEL FILTER (Primary - 70 micron) 70 micron replacement filter element no. RC81465
B IN-LINE FUEL FILTER (Secondary - 10 micron) 10 micron replacement filter element no. EN269654
Figure 6-22: Engine Fuel Filters
B
A
KEY DESCRIPTION
A ENGINE OIL COOLER
B ENGINE BLOWER HOUSING
C COOLER MOUNTING BOLT (x 2)
Figure 6-23: Engine Cooler Maintenance
A
B
C