VAN WAMEL PERFECT ZW Series, Инструкция по эксплуатации

Страница: 10 / 69

8
15.
The disconnected P.T.O. shaft must by ‘stored” by the corre
sponding chain.
16. After you have disconnected the P.T.O. shaft you must replace the tractor P.T.O. shaft cover directly.
1.2.3 Service
1. During adjustment-, cleaning- and service-work, but also when you have to remove an object out of the machine you
must disengage the tractor P.T.O. shaft , shut-off the motor and pull the tractor key out.
2. Check at regular times (at least every 8 hours) all bolts and nuts. Re-tight them if necessary.
3. Use adequate supports when you have to work under a lifted machine.
4. Use always correct tools and wear gloves when you replace flails.
5. Collect used and/or excess oil and grease for environment friendly disposal.
6. Check at regular times (at least every 8 hours) the condition of the protection elements and wear-off parts. replace them
if necessary.
7. Disconnect the dynamo ánd the battery during electric welding-work.
8. Re-placement parts must comply at least the manufacturer specifications.
You do not have doubts when you use original PERFECT parts !!!
1.3 Technical information
1.4 Putting in service
Nobody should stand in between the tractor and the machine when you change the flail mower from central
mount- to offset-position .
The machine is supplied from the factory without oil in the hydraulic hoses and cylinders. Be sure when first time using
that no air left in the hoses and cylinders
.
1.4.1 Fitting to the tractor
The machine is suitable for every standard 3-point linkage, category II. The width of
lower 3-point linkage arms should be 870 mm (34") centre to centre.
Please lock these pins securely with the spring lock.
ZW
–
150 ZW
–
180 ZW
–
210 ZW
–
240
Cutting width cm 150 180 210 240
Speed flail rotor omw./min. ± 2225 ± 2225 ± 2225 ± 2225
Number of flails n 16 18 22 24
Minimum tractor power kW/pk 37/50 44/60 51/70 59/80
Maximum tractor power (without clutch)
kW/pk
55/75 55/75 55/75 75/100
Cutting height cm 3
–
9 3
–
9 3
–
9 3
–
9
Coupling Kat. II II II II
Offset to the right (from center of tractor)
maximum cm 254 284 314 344
Offset to the right (from center of tractor)
minimum cm 94 124 154 184
Machine width cm 175 206 236 266
Machine height cm 85 85 85 95
Machine weight kg 735 780 825 900