Van Der Stahl PTT-100 V, Руководство по эксплуатации

Страница: 34 / 48

PTT-100V Operating Instructions Ver.4.03E
34
DATE <**.**.**>
TIME <**:**:**>
VIU 0001
FILM OFF
VIU 0001
FILM ON
PUSH KEY
PASS or FAIL
ERROR SAMPLE 1
PUSH ENTER KEY
1 : PATTERN 1
10mm/300mm/AUTO
FILM SET 0001
PUSH START KEY
NG 51 MAX LOWER
PUSH SETUP KEY
00 ID: ADMINIST
PASSWORD<000000>
00 ID: ADMINIST
PASSWORD<000000>
VIU Inspection
Peel tensile test
Select the desired
operation pattern.
Inspection is complete.
With the Inspection Mode 2, the VIU and PTT inspections are performed as one set.
7-2 Operation procedure - with the inspection mode 2 -
Refer to “8 Error display for
the detail.
Select the desired seal
failure number from 1 to 9.
ADMIN password will be
required to cancel the error if
logged in as Operator and
ADMIN is activated.
ADMIN password will be
required to cancel the error if
logged in as Operator and
ADMIN is activated.
Attention
Please note that the Operators cannot change the setting when the Administrator ID is
registered and activated
.