Van Der Stahl PTT-100 V, Руководство по эксплуатации

Страница: 11 / 48

PTT-100V Operating Instructions Ver.4.03E
11
Surrounding temperature and humidity
Place the machine on a flat place
Do not set the machine to the following places:
Please use the machine in the following work environment.
Place the machine on a sturdy, flat surface to ensure optimum stability. Placing the machine on an unstable
place may affect the precision of the test result due to the instability.
･
Exposed to the direct rays of the sun or the heat source.
･
Exposed to continuous vibration caused by machines.
･
Close to the noise generator such as high voltage products and power source.
･
Exposed to the strong electromagnetic pluses.
･
With rapid temperature change, high humidity, the dust, and surrounded by the corrosiveness gas.
･
Unstable to place the machine.
<Others>
･
For more accurate measuring, operate the machine in the temperature described in the certificate of
inspection.
･
When installing the machine to the place where humidity is less than 30%, please use products such as
an anti-static mat to prevent static electricity.
･
Condensation occurs when the machine is exposed to the rapid temperature change. If the condensation
occurs, leave the machine in the new environment more than one hour before using. Use the machine
after confirmed that there is no condensation.
Temperature 5 ~ 40 ºC/ 40 ~ 105ºF
Humidity 30 ~ 80%RH (no condensation)
5 Machine installation