Van Der Stahl PTT-100 V, Руководство по эксплуатации

Страница: 25 / 48

PTT-100V Operating Instructions Ver.4.03E
25
1: LIMIT
MAX: U100 L00
1: LIMIT
MAX: U100 L00
1: LIMIT
MAX: U100 L00
1: LIMIT
AVE: U100 L00
1: LIMIT
MAX: U001 L00
1: LIMIT
MAX: U100 L99
1 Select the average or maximum of the peel tensile
for automatic pass/fail determination.
Available selections : MAX / AVE
Use arrow buttons to select the desired
setting.
Press arrow button to go to the upper limit
setting.
2 Set the upper limit. The maximum tensile strength
of seal allowed to “PASS” the test. A test result
exceeding the upper limit will be judged as “FAIL”.
Setting range : from 1 to 100N
Use arrow buttons to set the desired setting.
Press arrow button to go to the lower limit
setting.
3
Set the lower limit. The minimum tensile strength
of seal allowed to “PASS” the test. A test result
under the lower limit will be judged as “FAIL”.
Setting range : from 0 to 99N
Use arrow buttons to set the desired setting.
4 Press button to confirm the setting.
6-5-13-6 Set pass/fail limit criteria
indicates the selected letter that flashes.
Attention
If you select “AUTO” mode, the machine
recognizes the test completion when the
peel strength becomes 0N for 5mm of grip
movement after exceeding 1.1N.
The “MANUAL” mode finishes testing
when the grip reaches to the end position.
To stop the test before the grip reaches to
the end, press
button.
TIPS When the test result is fail, NG wll be
displayed on the screen. Refer to “8 Pass/
fail limit criteria” for the detail.