Van Der Stahl MS-350 NP Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 48

Van Der Stahl MS-350 NP Series Скачать руководство пользователя страница 3

MS-350 NP Operating Instructions Ver 4.02E

3

100V

15A以下

200V

20A

100V

20A

200V

30A

100V

20A、30A

Before using, always verify the voltage specification of your particular unit and operate it at the
correct voltages. Please note the following.

1

The voltage specification of your unit is listed on the label which displays the serial
number.

This label can be found on the machine body.
2

Please confirm the plug configuration on your specific unit.

The explanations and illustrations in this operator's manual utilize the plug configurations most
common in Japan.

Thank you for purchasing the MS-350 NP series sealer.
Please read all of the safety and operating instructions before operating this machine. Periodic
maintenance and proper operation are necessary to ensure safety when using this impulse sealer.

Keep this manual on hand when operating the sealer.
Set the heating time according to the material and thickness of the film.
As a result of research to further improve the MS-350 NP series, some details in the operating
instructions may differ from your actual machine. For operating problems or product
information, please contact your local dealer.

Foreword

This manual is designed to cover machines of various voltages and
plug configurations

About the warning labels

The following marks are used in this manual to easily identify the conditions of risks, damages,
or some tips for the optimal use of your unit.

Caution

�� Minor injuries or damages to the unit may occur when the instruction is ignored.

Warning

�� Severe injuries or fatal accidents may occur when the instruction is ignored.

Danger

�� Critical injuries or fatal accidents will almost certainly occur when the instruction

is ignored.

Attention

�� Important Notes and Restrictions - Read the directions in order to avoid misuse

of the unit.

TIPS

�� Great Tips and References when using the unit - Highly recommend reading

through the information.

Warning

Voltages and plug configurations differ according to various worldwide specifications.

Always verify those of your particular unit before beginning operation. Connecting the
power cord to an outlet of a different specification is extremely hazardous.

«
1
2
3
4
5
...
»

Содержание MS-350 NP Series

















































Отзывы:

Нет отзывов