48
FAS-402 Series Operating Instructions Ver. 4.06E
1
After adhering the silicone rubber, cut the new
50mm-width glass tape 2cm longer than the
silicone rubber length.
2
Fold the excess glass tape along both ends of
the pressure lever.
3
Fold the corners inward as shown in the right
illustration.
4
Fold the glass tape along both edges so that the
excess tape over the pressure lever adheres to
the sides of the pressure lever.
5
Cut the new 19mm-width glass tape 2cm longer
than the silicone rubber length. Adhere it over
50mm-width glass tape as shown in the right
illustration.
6
Fold the excess glass tape along both ends of
the pressure lever.
[Replace when] The heating element breaks often, the
seal becomes messy, etc.
[Essential tools] Scissors
9-8 Replace the 50mm-width glass tape
(For single-side heating models)
1
2
3
4
5
6
Pressure lever
Silicone rubber
Glass tape 50mm width
19mm-width glass tape
Fold upward
Fold the excess part
inside
Adhere to the pressure
lever
Fold upward
