4
FAS-402 Series Operating Instructions Ver. 4.06E
1 Package contents ………………………………………………………………………………………… 6
2 Warning-Caution label location and content ………………………………………………………… 7
3 Operating precautions …………………………………………………………………………………… 9
For safety operating …………………………………………………………………………………………………………………………… 9
For smooth operation ……………………………………………………………………………………………………………………… 11
Other safeguards …………………………………………………………………………………………………………………………… 12
4 Outline of structure ……………………………………………………………………………………… 13
5 Proper operating boundaries for the FAS-402 series …………………………………………… 13
6 Major parts and function ……………………………………………………………………………… 14
7 Proper use of the sealer ……………………………………………………………………………… 15
7-1 Secure the work place ……………………………………………………………………………………………………………… 15
7-2 Install the foot switch ……………………………………………………………………………………………………………… 15
7-3 Adjust the table height and angle ………………………………………………………………………………………………… 15
7-4 Adjust the nozzle height …………………………………………………………………………………………………………… 16
7-5 Check the dry filter ………………………………………………………………………………………………………………… 16
7-6 Remove the filter clog with the weep valve ……………………………………………………………………………………… 16
7-7 About the auto-drain function ……………………………………………………………………………………………………… 16
7-8 Plugging in the electrical power code …………………………………………………………………………………………… 17
7-9 Turn ON the circuit breaker and power switch …………………………………………………………………………………… 17
7-10 Set an operating condition with the control unit ………………………………………………………………………………… 17
7-11 Test sealing ………………………………………………………………………………………………………………………… 18
7-12 Finish sealing ……………………………………………………………………………………………………………………… 18
7-13 Turn OFF the circuit breaker and power switch ………………………………………………………………………………… 18
7-14 Inspection after operation ………………………………………………………………………………………………………… 18
8 Control unit setting and operation procedures …………………………………………………… 19
8-1 Operate the machine with a pre-installed operation pattern …………………………………………………………………… 20
8-1-1 Sample operating procedures :
“seal only”
operation…………………………………………………………………… 21
8-1-2 Sample operating procedures :
“manual sealing”
operation …………………………………………… 22
8-2 Register sample operation patterns ……………………………………………………………………………………………… 24
8-2-1 Sample case: how to register the
“seal only”
operation ………………………………………………………………… 25
8-2-2 Sample case: how to register the
“vacuum (timer) + seal”
operation ……………………………………………… 26
8-3 Explanation of the terms …………………………………………………………………………………………………………… 27
8-4 How to set the control unit ………………………………………………………………………………………………………… 28
8-4-1 Seal counter ………………………………………………………………………………………………………………… 29
8-4-2 Select a desired operation number ………………………………………………………………………………………… 29
8-4-3 Delete a registered operation pattern ……………………………………………………………………………………… 29
8-4-4 Select / Enter / Change the sealing method ……………………………………………………………………………… 30
8-4-5 Set the heating temperature ………………………………………………………………………………………………… 30
8-4-6 Set the heating time ………………………………………………………………………………………………………… 31
8-4-7 Set the cooling temperature ………………………………………………………………………………………………… 31
8-4-8 Select the vacuum pattern ………………………………………………………………………………………………… 32
8-4-9 Set the vacuum time ………………………………………………………………………………………………………… 32
8-4-10 Set the vacuum level ……………………………………………………………………………………………………… 33
8-4-11 Select the maintenance mode …………………………………………………………………………………………… 33
Table of Contents
