manualshive.com logo in svg

Valueline 2913181, Руководство пользователя

Поделиться
Скачать
Valueline 2913181 Скачать руководство пользователя страница 23

Installation

2637_en_D

PHOENIX CONTACT

2-11

Figure 2-9

PCI slot 0 card installation

c)

Attach the PCI card, 1, to the bracket frame, 2, and secure it with the retaining 

screw and washer previously removed. 

d)

Position the PCI card and frame assembly so the frame assembly rests on top of 

the vibration reduction strip. Carefully push the card into the connector, 3, ensuring 

the frame assembly aligns with the mounting holes in the chassis and the card is 

properly seated in the connector. 

e)

Secure the bracket frame to the chassis using the two Phillips-head screws 

previously removed in step a).

6.

Re-install the top cover, and replace and tighten the four screws previously removed.

7.

Reconnect power to the VL IPC.

8.

Start the VL IPC.

2

1

3

NOTE: 

Tighten all screws on the VL IPC frame to no more than 7 Nm torque.

Содержание 2913181





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды