Valueline 2913181, Руководство пользователя

Страница: 14 / 84

Valueline IPC
2-2
PHOENIX CONTACT 2637_en_D
2.1.2 Wall-mount and bookshelf installation
Wall mounts are valid for VL IPCs that do not include a display. Use this type of mounting to
install the VL IPC on the inside of a cabinet. The VL IPC can be attached to a flat surface in
either a wall mount or bookshelf orientation. Either way, attach the unit using the four key
holes. The mounting surface must be flat and not subject to vibration.
Figure 2-1 Wall and bookshelf mounts
To install a wall mounted VL IPC, follow these steps:
1. Use the VL IPC as a template and mark the locations of the key holes on the mounting
surface.
2. Use the correct anchor type for the mounting surface and securely attach the VL IPC to
the wall. Anchor hardware must be smaller than 6 mm. Ensure the attaching hardware
is in the small section of the key holes.
3. Tighten mounting screws. Be careful not to overtighten the attachment hardware.
NOTE:
Exceeding the system temperature limits can result in performance degradation of any or
all components. It is therefore important that the ambient temperature of the installation
environment is kept within the system temperature limits of your Valueline IPC.
X10 COM1
X9
VG
A
X8 D
V
I D
ERR
O
R
RU
N
HDD
PWR
X7 USB
X5 USB X4 USB
X6 USB
X3 ETH
X
2 ETH
X1:
PWR 24VDC
+–
A
B
X10 COM1
X9
VG
A
X8 D
V
I D
ERR
O
R
RU
N
HDD
PWR
X7 USB
X5 USB X4 USB
X6 USB
X3 ETH
X
2 ETH
X1:
PWR 24VDC
+–
A
B
PUSH PUSH
50.0 mm
289.0 mm
140.0 mm
280.0 mm
24.0 mm
Without PCI
Slots
With PCI
Slots
(11.4 in.)
(5.5 in.)
(2.0 in.)
(0.9 in.)
(11.0 in.)
NOTE:
The unit must be installed with the small end of the key hole oriented up.