Value Hobby Sabre-44 3D Profile, Инструкция по эксплуатации

Страница: 17 / 19

www.valuehobby.com/sabre-44.html
17
Step2. Assemble the motor mount as shown. And
use some epoxy to secure it.
Step3. Insert the motor mount into the fuselage.
The assembly is slightly off-center for the motor
offset. Use some epoxy to glue it to the fuselage
securely.
Step4. Use 2.5mm (0.1in) drill bit to drill four holes
on the locations marked on the mount.
Step5. Use four M3*15mm (0.6in) socket head cap
screws and four M3 locknuts to install the motor to
the motor mount.
Step6. Install the prop to the motor.
The mounting location for ESC and battery is shown
in the following picture. Opening A and B are on
the different side of the fuselage. You can thread
the servo extension from opening A through the
fuselage and out of the opening B.