Value Hobby Sabre-44 3D Profile, Инструкция по эксплуатации

Страница: 15 / 19

www.valuehobby.com/sabre-44.html
15
Step8. Center the rudder and use two self-tapping
screws to install the tail wheel gear to the fuselage.
Tighten the grub screws on the wheel collar.
Section 7: Rudder and Elevator Servo
& Linkage Installation
Required items:
Servo (2)
Ball linkage set (2)
Control horn (2)
Servo arm (2)
Step1. Use a hobby knife to remove the coverings
for rudder and elevator servo opening.
Step2. Install the elevator servo control horn.
Connect the pushrod to the control horn using `````.
Step3. Install the elevator servo assembly to the
fuselage.
Step4. Center the elevator, and connect the
pushrod wire to the servo arm.