Value Hobby Sabre-44 3D Profile, Инструкция по эксплуатации

Страница: 10 / 19

www.valuehobby.com/sabre-44.html
10
Step3. Install the pushrod connector to the servo
arm and install the servo arm to the disc servo horn
as shown.
Step4. Use a hobby knife to cut a hole for the servo
wire on the wing nearby the fuselage.
Step5. Thread the servo wire through the wing and
out of the hole on the wing.
Step6. Position the servo and use a 1.5mm (0.06in)
drill bit to drill two holes as shown.
Step7. Use two self-tapping screws to secure the
servo to the wing.
Step8. Use a screw provided with servo to install
the servo arm assembly to the servo. (Need to
electronically center the servo first.)